To set a stations access rights, enter a station’s IP address and password and choose
Read
or
Read/Write
.
When a setting is made, click
OK
. Repeat the procedure for the next stations. When
all settings are made, click
OK
in the configuration dialog box to make the changes
effective.
Config Window – IEEE 802.1X Panel
The
IEEE 802.1X
panel allows you to set up 802.1x authentication on an Outdoor
Access Point. Check
Enable 802.1X Access Control
box will activate the three
subcategories of IEEE 802.1x related controls: Authentication Options, Accounting
Options, and RADIUS Settings. These controls are illustrated and explained below.
Authentication Options
Figure 19. IEEE 802.1X panel – Authentication Options
Supplicant Timeout
– This control sets the maximum time that the AP will wait for
an authentication response from a client. Once this limit has been reached, the AP
will check how many times it has tried (see next).
30
Outdoor Access Point
