Air Live VS-100 User Manual Download Page 19

Page: 19 / 88

2. Package Contents and Installation

AirLive VS-100 User’s Manual

After keying in new username and password, click “Submit” button to perform your setting

accordingly. Click “<<” button will go back to previous page.

Wireless

VS-100 does not support wireless function.

2.5 Using UPnP of Windows® XP or Vista

UPnP™ is short for Universal Plug and Play, which is a networking architecture that

provides compatibility among networking equipment, software, and peripherals. This device

is an UPnP enabled device. If the operating system, Windows XP or Vista, of your PC is

UPnP enabled, the Network Camera will be very easy to be found.

Please refer to Appendix J to enable UPnP settings only if your operating system of PC is

running Windows XP.

Note: Windows 2000 does not support UPnP feature.

To discover your device, go to your Desktop and click My Network Places.

Click the targeted Device. Then Internet Explorer will connect to this Network Camera

automatically.

Summary of Contents for VS-100

























































































Search results

Summary of Contents for VS-100

Reviews:

Related manuals for VS-100

Brands by name

Popular brands

Air Live VS-100, User Manual

Search results

Summary of Contents for VS-100

Reviews:

Related manuals for VS-100

Brands by name

Popular brands