Air Live VS-100 User Manual Download

Page: 57 / 88

4. Operating the Video Server

AirLive VS-100 User’s Manual

Max Frame Rate:

Defines the targeted frame rate of this profile. For example, set the frame rate to 15 fps,

then the image will be updated for 15 frames per second as possible. User need to set

reasonable max frame rate versus video quality under the limited bandwidth.

GOP Control:

Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then

the video stream will have one Intra-frame every 30 frames.

Multicast Video:

IP address and port for multicast video streaming of the selected profile.

Multicast Audio:

IP address and port for multicast audio streaming of the selected profile.

Always Enable Multicast:

Multicast streaming is always enabled or by request.

Summary of Contents for VS-100

























































































Search results

Summary of Contents for VS-100

Reviews:

Related manuals for VS-100

Brands by name

Popular brands

Air Live VS-100, User Manual

Search results

Summary of Contents for VS-100

Reviews:

Related manuals for VS-100

Brands by name

Popular brands