5. PC Configuration
AirLive N.Plug User’s Manual
90
5. To apply your changes:
z
Use the "Deactivate" and "Activate" buttons, if available.
z
OR, restart your system.
5.2.9 Other Unix Systems
To access the Internet via the Wireless Router:
z
Ensure the "Gateway" field for your network card is set to the IP Address of the
Wireless Router.
z
Ensure your DNS (Name Server) settings are correct.
5.2.10 Wireless Station Configuration
z
This section applies to all wireless stations wishing to use the Wireless Router 's
access point, regardless of the operating system that is used on the client.
z
To use the Wireless Router, each wireless station must have compatible settings, as
following:
Mode
The mode must be set to Infrastructure.
SSID (ESSID)
The network name must match the value used on the Wireless
Router.
Note
The SSID is case- sensitive.
Disable
If there is no security is enabled on the Wireless Router, the
security of each station should be disabled as well. And, you can
connect the Wireless Router without security, but it is NOT
recommended.
WEP
By default, WEP on the Wireless Router is disabled.
z
If WEP remains disabled on the Wireless Router, all stations
must have WEP disabled.
z
If WEP is enabled on the Wireless Router, each station must
use the same settings as the Wireless Router.
