4. Web Configuration
AirLive N.Plug User’s Manual
48
4.2.7 WPS
Disable WPS
Check the box to disable the WPS function, default setting is
enabled.
WPS Status
Here shows the current status of the WPS function. Default
setting is Configured, click Reset to UnConfigured to
re-configured the WPS connection.
Self-PIN Number
Here shows the 8-digit numbers PIN code of the router itself.
Enter the Self-PIN Number to client (Registrar) end and click the
PIN button at the client end to make a WPS connection. It will
connect with the wireless router within two minutes and get IP
address.
Push Button
Configuration
Click Start PBC button (or press the physical WPS button on the
Wireless Router once), meanwhile, the client should also click the
PBC button simultaneously within 2 minutes.
Client PIN Number
Enter the client (Enrollee) PIN code into the blank field then click
the Start PIN button to make a WPS connection with client. Then,
the wireless router will connect to client within 2 minutes and get
IP address.
Current Key Info
This table shows the security status of the Wireless Router. If user
would like to set up the security, please go to Wireless > Security.
