5. Configuration
AirLive FE-201DM User’s Manual
43
•
Motion: This method will trigger the Camera snapshot operation according to
the set time interval (in seconds) whenever motion is detected within the
defined days of the week and at the time of the set days. Single or 6 snapshots
may be captured as defined. The stream of accumulated snapshots may be
sent to host by E-mail, FTP, stored in the SD card, Remote Disk as preferred
or through all of them.
•
GPIO: On the defined days of the week and at certain time of the set days, the
Camera will trigger its GPIO Input Signal according to the set time interval (in
seconds) when its state changes. Single or 6 snapshots may be captured at a
time as defined.
User could select “Single” or “6
snapshot…”
