5. Configuration
AirLive FE-201DM User’s Manual
41
.
3. Snapshot
The Snapshot
tabbed pane sets the Camera to take snapshot images when motion is
detected. The four methods available for selection are Always, Schedule, Motion, and
GPIO Input, each of which can be set up with user scheduled recoding time and
duration, as well as defining the video record file target destination.
•
Always: Under this method, the Camera automatically continuous to capture 6
snapshots of the area under surveillance at every 1 or 2 seconds interval. 3
previous snapshot frames are collected from the Camera buffer and 3
snapshot frames are captured live. The stream of accumulated snapshots may
be sent to host by E-mail, FTP, stored in the SD card, Remote Disk as
preferred or through all of them.
