Air Live FE-200VD User Manual Download Page 22

Page: 22 / 72

4. Administrating the Device

AirLive FE-200VD Manual

Administrating

the Device

System Setting

This function is only available for a user logs into Camera as administrator.

Click on each menu name to display its setting page.

Item

Action

Video

Configure bit rate and frame rate of video profiles.

Camera

Adjust camera parameters.

Event

Setup Event server, Motion Detection, I/O Ports and Event
configuration.

Schedule

Configure the schedule while event triggered

Network Configure

Network

settings such as DHCP, DDNS, RTSP,

PPPoE and UPnP

System

Configure system information, date & time, maintenance,
and view system log file.

Customize

Provides the user features to customize the outlook of the
web user interface

4.1

Video: Configure Profile

4.1.1 General

OSD Setting:
Enable OSD to display camera name and date/time on the image.

Summary of Contents for FE-200VD









































































Search results

Summary of Contents for FE-200VD

Reviews:

Brands by name

Popular brands

Air Live FE-200VD, User Manual

Search results

Summary of Contents for FE-200VD

Reviews:

Brands by name

Popular brands