background image

Table of Contents 

i     

Ether-FSH2400N Fast Ethernet Switch    User’s Manual V1.4.1 

 
 
 

Table of Contents 

 
 

TABLE OF CONTENTS ........................................................................................I

 

1

 

PRODUCT OVERVIEW ........................................................................1

 

Introduction....................................................................................................................... 1

 

24 × 10/100Mbps ports Fast Ethernet Switch................................................................. 1 
Store-and-Forward Architecture against Packet Loss..................................................... 1 
Active Flow Control ....................................................................................................... 1 
Full Wire Speed .............................................................................................................. 1 
System/Port Status Information at a Glance ................................................................... 2 

Product Features............................................................................................................... 3

 

Basic Features ................................................................................................................. 3 

2

 

PREPARATION BEFORE INSTALLATION.........................................4

 

Unpack the Package.......................................................................................................... 4

 

The Front Panel................................................................................................................. 5

 

The Rear Panel.................................................................................................................. 5

 

Power Switch .................................................................................................................. 5 
AC Power Connector ...................................................................................................... 5 

Summary of Contents for Ether-FSH2400N



























Reviews: