2 Preparation before Installation
5
Ether-FSH2400N Fast Ethernet Switch User’s Manual V1.4.1
The Front Panel
The front panel is where you can find the sixteen 10/100Mbps station ports and the LED indicators.
For the technical specifications of the ports, please refer to
Appendix A, Product Specifications
for
detailed information. For information concerning LED indicators, please refer to
Chapter 5, LED
Indicators
.
Fig. 2-4 Front Panel
The Rear Panel
The rear panel is where you can locate the power switch, AC power connector, and ventilator.
Power Switch
You can turn the power switch on /off to activate/deactivate the Switch. To turn on the Switch, press
the switch to the ON position. To turn off, press the switch to the OFF position.
AC Power Connector
This is a three-pronged power connector where the power cord should be attached. Just plug the
female end of the power cord into the connector, and the male end of the power cord into an AC
power outlet. The switch supports an input voltages ranging from 100 ~ 240 V
AC
@ 50~60 Hz and
with a maximum power output of 40 watts.
Fig. 2-5 Rear Panel
Power LED
Station Port LEDs
Power Switch
Power Connector
Station Ports
Summary of Contents for Ether-FSH2400N
Page 8: ......
