LoadLifter 5000 Series
MN-1052
9
16. Once the frame brackets have been installed on both sides, the stock suspension
can be put back together.
17. Set the coil springs back into position using the index marks from the previous step
and raise the axle back up making sure the spring indexes into the top and bottom
spring seats correctly.
18. Reinstall the wheels and lower the vehicle so the wheels rest on the ground. Torque
the lug nuts to the manufacturer’s torque specs.
19. Install the lower shock bolts back onto the axle and torque to 100 lb.-ft. (135Nm).
ASSEMBLING THE AIR SPRINGS
1. Set a roll plate (E) onto the air spring (D).
The radius (rounded) edge of the roll plate (E) will be toward the air spring, so that the air
spring is seated inside both roll plates.
2. Install the swivel fitting (F) into the top of the air spring finger tight plus 1 1/2 turns
(Fig. 16).
3. Insert four carriage bolts (L) into the upper air spring bracket (B) and set the upper
bracket onto the air spring assembly (Fig. 17).
NOTE
fig. 16
F
fig. 17
B
L
L
H I J