background image

10

MN-333

Replacement Information

If you need replacement parts, contact the local dealer or call Air Lift customer service at

(800) 248-0892. Most parts are immediately available and can be shipped the same day.
Contact Air Lift Company customer service at (800) 248-0892, first if:

•  Parts are missing from the kit.

•  Need technical assistance on installation or operation.

•  Broken or defective parts in the kit.

•  Wrong parts in the kit.

•  Have a warranty claim or question.

Contact the retailer where the kit was purchased:

•  If it is necessary to return or exchange the kit for any reason.

•  If there is a problem with shipping if shipped from the retailer.

•  If there is a problem with the price.

Contact Information

If you have any questions, comments or need technical assistance contact our customer 

service department by calling (800) 248-0892. For calls from outside the USA or Canada, our 

local number is (517) 322-2144.

For inquiries by mail, our address is PO Box 80167, Lansing, MI 48908-0167. Our shipping 

address for returns is 2727 Snow Road, Lansing, MI 48917. 

You may also contact us anytime by e-mail at [email protected] or on the web at 

www.airliftcompany.com.

Load Controller II

Summary of Contents for 25592

















Reviews: