Air King K52 Service & Installation Download Page 9

 July, 2016 

 

 
 

OPERATING  INSTRUCTIONS 

 

 
 
 
To operate a K52 Vacuum coin operated model follow these instructions: 
 
     A. Insert correct amount of coin or coins into the money slot of the machine. 
         The machine will then start. 
     B. Take two inch vacuum hose off hose hanger and proceed to vacuum vehicle. 
 
 
 
To operate a K52 Vacuum free operated model follow these instructions: 
 
     A. To start machine there will be either a toggle switch or pushbutton switch 
          to turn machine on either move switch up or down to start or simply push     
          the button to turn vacuum on. 
     B. Take two inch vacuum hose off hanger and proceed to vacuum vehicle. 
  
 
 
To operate a K552- or a K52-9 Air Vacuum and Air Vac. remote follow these 
instructions.  
  
     A. To operate the Vacuum side insert the correct amount of coin or coins into 
          the money slot on the right hand side of the vacuum control box. The 
          vacuum will then start, repeat the step B above and proceed to vacuum                              
          vehicle. 
 
     B. To operate Air side insert the correct amount of coin or coins into the     
          money slot on left hand side of the vacuum control box.  The Compressor           
          will then start.  Take hose off of hose hanger or out of reel assembly place       
           end of hose on valve stem of tire.  You will have to hold the end of the hose     
          on to the valve stem. 
 

 

     C. Depress handle on air gauge and begin to fill tire.  To check air pressure                   
         in tire leave hose end on valve stem and let up on handle of gauge.  The             
         gauge will pop out showing the air pressure in the tire. 
 

 

 

 

 

 

 

Summary of Contents for K52


















Reviews: