Unit is on a unstable surface
Move the unit to a stable flat
surface
Mist coming out around the
nozzle
There are apertures between the
nozzle and water tank
Dip the nozzle in water for a
while and then fix it to the socket
on water tank
Water doesn‟t come down to
basin
Backup by filter
Rinse the filter by tap water
Display shows blinking digital
30%RH
Current humidity level is lower
than 30%
Just keep it working
Display shows Sd (Sensor
defect)
Poor contact
for
humidity
sensing element
Reinstall it
Open or Short for Temperature
Resistance
Replace it
*
Maintenance:
In case when the water is hard which means water contains too much calcium and magnesium,
they can cause “white powder” problem and give heavy scales on the surface of water basin,
transducer and inner surface of the water tank. Scales on the surface of transducer will unable the unit
work properly.
We recommend:
1)
Use cold boiled water or distilled water.
2)
Clean the transducer, water tank and basin unit every week.
3)
Change the water in water tank more often to keep it fresh.
4)
Make sure to pull out the water from the water tank and dry the water basin before you store the
unit unused for a long period of time.
5)
Clean the whole unit, and make sure that all parts of the unit are dried completely before unused
for longer period of time.
6)
Do not use the chemical for cleaning.
How to clean the transducer:
1)
Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5 minutes;
2)
Brush out the scale on the surface.
3)
Rinse the transducer with clean water.
How to clean the basin unit:
1)
Cleaning the water basin with soft cloth and the cleaning abluent if there is scale in it.
2)
If the scale is covered on the security switch, drop the cleaning abluent on the scale and clean it
out with the brush.
3)
Rinsing the water basin with clean water.
DISPOSAL
: Do not dispose this product as unsorted municipal waste, collection of such
waste separately for special treatment is necessary.
