background image

 

11 

Limited Warranty   

 

 
TWO-YEAR LIMITED WARRANTY.

 The Air Force Pro™15, 40, 60, 80 Linear Air Pump covered 

in this manual, is warranted under normal use for two years after purchase date. Any part 
determined defective in material or workmanship can be returned with a receipt of purchase to 
the retail store where it was purchased. Product under warranty will be repaired or replaced. 
 

LIMITATION OF LIABILITY

. To the extent allowable under applicable law, liability consequential 

and incidental damages are expressly disclaimed. Liability in all events is limited to and shall not 
exceed the purchase price paid.   
 

WARRANTY DISCLAIMER.

 Product information in this literature is provided for the sole 

purpose of identification, and does state or imply that products are merchantable, or fit for a 
particular purpose, or that the products will conform to the descriptions.   
 

PRODUCT SUITABILITY.

 Many jurisdictions have codes and regulations governing sales, 

construction, installation and /or use of products for certain purposes, which may vary from those 
in neighboring areas. While we attempt to assure that the products comply with such codes, it 
cannot guarantee compliance, and cannot be responsible for how the product is installed or used. 
Before purchase and use of a product, review the product applications, and all applicable 
national and local codes and regulations, and be sure that the product, installation, and use will 
comply with them.   

Please read this manual and save for future reference. 

This pump is Oil-less compressors requiring NO lubrication. 

Consult your supplier before using at high altitudes. 

 

 
 
 
 

Thank you for choosing  Air Force Pro™ Linear Air  Pumps  from Sunlight 

Supply, Inc. This unit is built to the highest standards using quality materials. 

To ensure the life and performance of your Air Force Pro™ Linear Air Pump a 

change of the diaphragm and air filter every year is absolutely necessary for 

users. Abuse or neglect will void the warranty. 

15

Summary of Contents for 15

















Reviews: