www.airdryclotheslines.com.au
2
Tools required:
•
Post hole digger
•
13mm spanner or socket and ratchet
•
Measuring tape
•
1-2 bags concrete mix
•
Ground marker
•
Spirit level
•
Cord cutters
Assembly instructions
Step 1:
Formula to find the post hole
centres
Using the overall width of the clothesline
ordered, subtract 140mm and this will give
you the distance between the post hole
centres
. Use the tape measure and mark the
location for the first post hole. From this
mark, using the hole centre measurement,
measure across the ground and mark the
location for the second post.
Step 2:
At these marked locations, dig 2 holes - 200mm diameter, for the posts. The hole depth
depends on the desired height of the clothesline. Standard posts are 2150 in length. Standard
height above ground is 1800. Leg extension kits are available if extra height is required or if
installation is on sloped land. Otherwise add 50-100mm to the height of the user as the height
of the top posts.
Step 3:
Mix the concrete as per the manufacturer’s instruction. Place one post inside the hole. Make
sure that the singular hole is facing front/ back and the dual holes are on the side, offset
towards the front. Check the height of the post and adjust accordingly. Pour the mixed
