Installing Bristles into the Pancake-Style Brush (SAO0307)
1. Be sure all parts are available to assemble the 12” Pancake-Style brush. See List at top.
2. Layout the Pancake-Style Brush Hub “TOP” piece with the 3 deep grooves facing up.
3. Install the pre-formed bundle of bristles (SAO0306) into one of
the grooves as shown. It must be centered with the Shrink
Tubing NOT extending out of the groove.
4. Install the Second and third bundles of bristles and push them
deep into the groove. None of the bristles can be allowed to be
out of the groove when the assembly is complete.
5. Place the Bottom of the Pancake-Style Hub over the bristles in
the Grooves of the top of the Hub, and turn it over so the 3
screws can be installed.
Page 20 of 26
