Page 9 of 26
(Vers.12.17.2018)
S
-
100 Refractory Walled Air Curtain Burner with HATZ 3H50TIC Diesel Engine
OPERATING MANUAL
Clutch Handle
HOW TO SET UP THE MACHINE
Clutch Handle
C) STARTING
PRE
-
CHECKS
1.
Check all belts and fluids.
2.
If so equipped, make sure manual PTO
(clutch) is disengaged (the lever in the LEFT
position).
Note:
The key can only be removed from the key
switch in the OFF (O) position. Turning the key
left to the unmarked position is not functional
and is not used for your HATZ engine.
STARTING Engine
1.
Turn key switch right to ON (1) position. The
display will be activated.
2. Wait for PREHEAT to complete.
3. Turn key to START( ), release, once en-
gine is running.
4. Press THROTTLE UP button (lower right),
wait for speed to level off at 900 RPM (
Idle
).
5. Manual PTO: Engage it now.
Automatic PTO, go to Step 6.
6. Press THROTTLE UP button (lower right),
wait for speed to level off at 1700 RPM (
Cool
Down
)
7. Press THROTTLE UP button (lower right),
wait for speed to level off at 2000 (S
-
116) or
2100 (S
-
119) RPM (
Operating Low
).
8. Press THROTTLE UP button (lower right),
wait for speed to level off at 2200 (S
-
116) or
2400 (S
-
119) RPM (
Operating High
).
PTO Lever (Manual Clutch)
ENGAGE
DISENGAGE
WARNING:
Your HATZ Diesel Engine is an EPA Tier 4 FINAL certified
computer controlled engine. Do not attempt to re
-
program the ECM by
pressing buttons at random on the control panel. Contact Air Burners Cus-
tomer Support Department for help, if any errors have occurred.
Call 772
-
220
-
7303. Note: The engine does not require DEF.
Control Panel
NOTE:
2019 Models may be fitted
with automatic clutches.