Maintenance
9
ATD can be checked ‘‘on-condition’’ if allowed by regulations and the aircraft manufacturer.
For checkout if applicable, use aircraft manufacturer approved checkout procedures.
9.1 Software and Database Loading
Software upgrades and databases are loaded using the integrated microSD card slot and a
microSD memory card.
While the software is actually loaded onto the device, the database remains on the microSD
card. Therefore database information is only accessible if the microSD card is installed.
If the microSD card is not installed, not all functions will be available.
Never remove the microSD card while the device is in operation. If the microSD card
is removed from the device during runtime, the device’s software may stop working.
In this case a system restart would be required.
9.1.1 microSD Card Slot
A microSD card slot is located on the right side of the unit’s front panel. A microSD memory
card can be inserted and removed from the device.
microSD card slot
microSD card slot
microSD card slot
Figure 9.1.: microSD Card Slot
To insert a microSD card, insert the card into the slot, print facing to the display, little nose
facing upwards for ATD-57 and ATD-80 or downwards for ATD-11 wiht controls on the right.
Gently push the card until it clicks in.
Inserting the microSD card in the wrong orientation may damage the slot.
ATD
·
Installation Manual
·
rev. 3.0
·
2019/05/09
33
