Air 802 AP-G300, User Manual

Page: 90 / 98

192.168.2.254. Then press the enter key. You should be directed to the
configuration screen.
If you have not gained access at this point, it maybe that your computer
does not have its TCP/IP Properties set to “Obtain an IP address
automatically” Your computer must be on the same network as the AP-G300.
The default IP address of the device is 192.168.2.254 and the subnet mask
is 255.255.255.0. For example in Microsoft Windows XP, you will need to
click under the control panel, then Network Connections, then Local Area
Connection, then scroll down to Internet Protocol (TCP/IP), highlight it and
click on Properties. If your computer has the “Use the following IP address”
clicked with an IP address entered below, you will either need to change it or
click, “Obtain an IP address automatically”. Then retry.
4. Configuring the AIR802 AP-G300
If you have gained access, you should have the screen shown below:
89