- 6 -
English
Fr
a
n
ç
ais
Neder
lands
Transfer entrance call
6-4
During communication with door station, press CALL button to call
the transferring station.
• CALL button (red) flashes and the communication with door
station is put on hold.
• The "All Call" function is activated to link all the master stations.
If TALK button is pressed at the transferred station, the unit
enters room-to-room communication. The sender informs the
receiver that communication will be transferred, and TALK
button is pressed and released at either the transferring station or
transferred station to end the room-to-room communication.
If TALK button is pressed at the transferred station, communication
with door station is performed. Press TALK button to end
communication.
NOTES:
1. If TALK button is pressed at the transferring station before starting
communication between the transferred station and door station, the unit
enters the condition where the forwarding source communicates with door
station. After ending the room-to-room communication in step 2, TALK button
must not be pressed at the transferring station for a while (until the transferred
station enters communication with door station).
2. Communication with door station ends automatically approx. 1 minute after
first starting the communication.
Press TALK button within 30 seconds to start it again.
If optional units are installed
6-5
When a sensor is activated or a call button is pressed, the
notification sound goes off and the entrance LED (red) and
transmit LED (red) flash.
Press TALK button to stop the notification sound.
∗
The notification sound only goes off during the times set in the external
sensor input settings of the master monitor station (JF-2MED).
The factory setting is "30 seconds".
TECHNICAL PRECAUTIONS
7
SPECIFICATIONS
8
• Operating temperature: 0
°
C to 40
°
C (+32
°
F to +104
°
F)
• Cleaning: Clean the units with a soft cloth dampened with a neutral
household cleanser. Do not use any abrasive cleaner or cloth.
• Power:
Supplied from the master monitor station
•
Calling:
Chime, approx. 45 seconds
• Communication: (HANDS-FREE mode) Approx. 60 seconds
(PTT mode) Press-to-talk, release to listen, approx. 60 seconds
• Dimensions:
160 (H) x 90 (W) x 25 (D) (mm)
6-5/16" H x 3-9/16" W x 1" D
• Weight:
240 g (0.53 lbs.) approx.
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and
will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto
itself the sole right to make the final decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty. This warranty shall
not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation of instructions furnished, nor extended to units which have been
repaired or altered outside of the factory. This warranty does not cover batteries or damage caused by batteries used in connection with the unit. This warranty covers bench repairs
only, and any repairs must be made at the shop or place designated in writing by Aiphone. Aiphone will not be responsible for any costs incurred involving on site service calls.
Aiphone will not provide compensation for any loss or damage incurred by the breakdown or malfunction of its products during use, or for any consequent inconvenience or losses
that may result.
1
2
3
1
Prrrrrrrr
2
JF-2SD 06.8.23 1:22 PM ページ6