REFRACTOR PROFESSIONAL OVERDRIVE
18
ENCLOSURE LAYOUT: PANEL MOUNTS
Attach the hardware to the enclosure as shown. (The I/O board is done in a later step.)
125B
100kB DUAL
10kB
10kB
FOOTSWITCH
BEZEL
& LED
MOUNTING NUT
MOUNTING NUT
DRESS NUT
LOCK WASHER
MOUNTING NUT
LOCK RING
MOUNTING NUT
OUTER WASHER
LOCK WASHER
DUST CAP
FOOTSWITCH
BEZEL & LED
The dress nut fits over the top of the mounting nut and is for aesthetic
purposes only. Wrap a rubber band around it to use as a grip when tightening.
Do not use metal tools on it or you run the risk of scratching or denting it.
You’ll need to hold the bezel in place when
tightening the nut. Be aware that the bezel is fairly
sharp. Try using a rubber band for grip instead of
just pressing your finger against the bottom.
The dust cap is not used on
the dual potentiometer.
The LED will just
sit loosely inside
the bezel for now.
POTENTIOMETERS
Volume: 10kB
Drive: 100kB dual
Tone: 10kB
