Connect the product with PC as shown below:
3.
U-Disk Status
When it is ON (if it could not be turned on, recharge it), connect it and PC with USB wire, and it is in
U-Disk status.
4.
Extent SD Slot
This product supports SD card with the slot shown as below:
When SD card in, the default storage is Flash. Once config the parameter in Desktop/System
Configuration/Storage to SD, the content in SD would be read.
5.
Download/Upload/Delete Files
When the priduct connected with PC, the product will be recognised as protable disk. It is considered
as the hardsisk or softdisk in the PC itself. The operation to the file on product storage is the same as
the operation to the local files. The files from internet would be directly copy to the product and
there’s no need to copy it to harddis as bridge.
Warning:
Do NOT move away the USB wire during sownload or upload, or the product would be damaged;
If use Windows ME
、
Windows 2000 or Windows XP, do disconnect product step by step, or the
product would be damaged.
