- 36 -
don’t set it.
Delete Length
Set delete length. This is optional config item. For example: if the
delete length is 3, the phone will delete the first 3 digits then send
out the rest digits. You can refer to examples of different alias
application to know how to set delete length.
Introduction of how to set up dial-peer to implement switch between multi- SIP lines
9T mapping: If you have registered a SIP1 server and set dial-peer according to the above
table
,
all calls will be sent via SIP1 server when you press the numeric key “9” in front of
dialing destination phone numbers.
8T mapping: If you have registered a Private SIP2 server and set dial-peer according to the
above table
,
all calls will be sent via SIP2 server when you press the numeric key “8” in front
of dialing destination phone numbers.
the rule of 2T means user need to dial the number with prefix 2 if he want to dial via IAX2 server
Examples of different alias application
Set by web
explanation
example
You need set phone number,
Destination, Alias and Delete
Length.
Phone number is XXXT;
Destination is 255.255.255.255
(0.0.0.2) and Alias is del.
This means any phone No. that
starts with your set phone
number will be sent via SIP2
line after the first several digits
of your dialed phone number are
deleted according to delete
length.
If you dial “93333”,
the SIP2 server will
receive “3333”