12
TESTING TORQUE
Status of the Tool LED Indicator
and Beeper
Tool Status
Action to be Taken
LED lights RED, YELLOW, and
GREEN together for one second.
A long beep for one second.
Tool is OK to use
-
LED lights RED for one second.
A long beep for one second
Preset torque is not
reached
Screwing fastener must
be performed again.
LED lights GREEN
Preset torque is
reached and tight-
ening is OK.
-
LED blinks YELLOW five times
Five short beeps
Battery power is
low.
Recharge battery or
replace with fully
charged battery.
LED lights YELLOW for five seconds
A long beep for five seconds
Battery power is
depleted. Tool
stops immediately.
Recharge battery or
replace with fully
charged battery.
LED lights BLUE and blinks in
YELLOW and GREEN
Tool is in reverse
operation mode.
-
If audited torque is low, then increase torque adjustment (page 11). If audited torque
is high, then decrease torque adjustment (page 11). Retest after adjustment.
Your actual joint
Digital Torque wrench
Check the torque installed
