AHCTS Series User’s Guide
DESCRIPTION OF FUNCTIONS 13
When all the digits have been set, press the
MEM
key to accept the value and return to
Program Function mode. Upon the next reading, "LO" will appear on the display if the
captured value is less than the low limit
H
IGH
L
IMIT
Use the high limit setting to visually flag the operator when a reading falls over a desired
maximum value. High limits are set in the identical way as low limits. Please refer to the
Low Limit section for details.
NOTE:
The green LED on the front of the display will flash when a peak is captured that
falls within the limit setting.
