10
Any service or preventative maintenance must be done by a trained technician or AcraDyne Authorized Service Center.
•
The tool gear train should be cleaned, inspected and re-greased every 25,000 tightening cycles.
•
Parts should be inspected for wear and any worn parts should be replaced.
•
In addition to this service, it is recommended that the tool should have its calibration checked at least annually or every
50,000 tightening cycles, whichever comes first.
CABLE ASSEMBLIES
The AcraDyne
DC electric nutrunner
tool system uses a single cable to
carry all necessary conductors for
superior ergonomics and durability.
• Flexible polyurethane cover for maximum durability, abrasion and
transmission fluid resistant
• Quick disconnects at both ends facilitate tool changeover and
troubleshooting
• The CAN data/signal is via RJ45 for products such as the KDM,
socket tray or computer
24330
Standard Tool Cable
LENGTH
MODEL
DESCRIPTION
M
FT
TOOL CABLES
24330
Cable G3 Tool Cable 3M
3
9.8
25350
Cable G3 Tool Cable 5M
5
16.4
24320
Cable G3 Tool Cable 10M
10
32.8
EXTENSIONS
24320
Extension cable 10M
10
32.8
25518
Extension cable 20M
20
65.6
25491
Breakaway Cable
Connector
Innovative Quick Disconnect Device reduces cable damage from dropping tools or pulling cables when in use.
BREAKAWAY CABLE CONNECTOR
• Can be placed at the tool or at the controller
• Easily snaps into place
• Connects using magnetic force
• Adjust holding force by removing or adding
magnets. Max holding force is 40 lbs / 18 kg
Controller
connection
Tool
connection
Recommended Maintenance
Accessories
