Aim TG Dash, User Manual

Page: 8 / 21

TG Dash
User Manual
Release 1.04
www.aim-sportline.com
7
1 6
3.1.3 – Display setup
In Display Setup sub-menu it is possible to set TG Dash display graphics.
Reverse : this function allows to reverse display colours from positive to negative.
Normally the display shows black characters on a white background. Press “OK” to
enable reversion.
Set Contrast : this function allows to increase or decrease screen contrast using a -5/+5
range of values. Use ”DEC-“ and “INC+.” buttons to increase/decrease the contrast.
Rolling number : this setting allows to show lap time using dynamic screens (rolling).
To choose this function set “ON” through “OK” button.
Mode : this function allows to select track data screen visualization mode. Press the
button in correspondence of “OK” to select the desired mode.
•
Dashboard : allows to have the page showing speed RPM and RPM graph
bar always on top. Lap time page is shown full screen only when a lap time is
recorded. After a custom fixed time the display comes back to the main page
(refer to
Sec. Laptime paragraph for further information on this sub-menu
option).
•
Laptimer : allows to always show lap time in full screen mode. The display
continues showing the same page also after having recorded a lap signal.
This mode is recommended in case split have been set as Predictive (see
paragraph 3.1.2).