39
This AP or SSID name is unique for the device.
An example of name is:” AiM-MXK10-7400107” where:
“AiM” is the prefix of all AiM devices
“MXK10” is the device identifier
“0107” is device serial number assigned by the factory.
To make a device more recognizable a name can be added to the SSID. With the limit of eight characters. Allowed characters are all letters,
capital too, all digits and these characters: ‘+ - _ () [] {}!.
“Space” type can be used provided that it is not the first one because it can cause incomprehension in some Windows
TM
versions.
Adding, for example, the driver’s name, Tom Wolf, the network name (SSID) becomes:
”AiM-MXK10-0107-TomWolf”
Once all parameters set click “Transmit”. MXK10 logger reboots and is configured with the new parameters. If MXK10 logger is protected
by a password, as recommended, Race Studio 3 will ask that password to authenticate.
Please Note
: the same Wi-Fi connection can be created with the operative system tool.
Once the device has been authenticated in the Wi-Fi network it can communicate using Race Studio 3.
9.2 – Adding MXK10 loggers to an existing network
This situation is ideal for a team with multiple drivers and staff members and is desired to communicate with one or more AiM devices
using the same PC network. Each MXK10 logger can have its password that adds another security and privacy level to the network.
Race Studio 3 will show all MXK10 loggers connected to the same network under “Connected devices” label, bottom left of the software
page: click the device.
Enter “Wi-Fi and properties” tab and set it on “Existing Network”; fill in network name, network password and device password.
Transmit the network settings to the device clicking “Transmit”: it reboots and joins that network.
Please note
: the only admitted password are those following WPA2-PSK standard.