21
5.2.5 – Wi-Fi
MXK10 features a Wi-Fi module to communicate with the PC. It
is mainly used to:
configure MXK10 shift lights
configure MXK10 expansion modules
transmit data to the PC
calibrate sensors
download sampled data to the PC after the test
All these functionalities are explained in chapters 6 and 8.
Wi-Fi available Modes are:
Auto: Wi-Fi is ON when the bike is stopped and OFF when the bike is moving
ON: Wi-Fi is always on
OFF: Wi-Fi is always OFF
“Wi-Fi Reset CFG” resets the Wi-Fi configuration and is very useful if you forget the password.
5.3 – Trip
In Menu page navigate through the icons with “
UP
” and ”
DOWN
” buttons, select the icon pushing “
SEL
”.
MXK10 offers five different odometers. One of them is not resettable while the others are. The first two odometers are used to show total
and partial mileage. The others are mainly used in races.
5.4 – Track Manager
Navigate through the icons using the pushbuttons “
UP”
and “
DOWN”
, and select the Tracks Icon pressing “
SEL
”.
Track Management is intended for the driver that uses his bike on a track, both for races and track days. In order to take advantage from
Track management, you have to install the GPS08 module, included in the kit. This is used for:
Lap time calculation
Speed calculation
Predictive lap time calculation
To calculate these data the system needs to know the start/finish line coordinates of the racetrack you are racing on: MXK10 comes with a
long list of the world main tracks, constantly updated by our technicians and automatically loaded to your PC when you run Race Studio 3
software and a Wi-Fi connection is available.
MXK10 provides two track selection modes:
automatic
manual
Automatic:
MXK10 automatically recognizes the track you are running on, loads the start/finish line and the possible splits coordinates and calculates
lap and split times. This is the best mode in most cases.
