24
6 – On track application
If you are going to use your bike on a track, for track days or competition and wish to take the maximum advantage from MXK10, you will
probably need to install a few sensors (suspension potentiometers, brake pressure..) and connect them to AiM Channel Expansion (shown
here below), a small module that you will connect to the EXP Port in the back of the device.
The steps to follow are:
install Channel Expansion
connect MXK10 to your PC via Wi-Fi or through the USB port placed on the back of MXK10 with an optional USB cable (part number
V02563030
)
configure MXK10 according to the sensors you have installed
calibrate the sensors
run your test
download the data, in order to analyse them
You may in any case have a quick review of your data on the display, without downloading them (
Data Recall
)
6.1 – Connection to the PC
Using AiM
Race Studio 3
software (from Race Studio 3.29.47) you can configure MXK10, manage its tracks database as well as check other
device functions through Race Studio 3 device window. You may connect it to the PC via Wi-Fi or using an optional USB cable (part
number
V02563030
):
using a Wi-Fi connection, please refer to chapter 9 where Wi-Fi configuration is explained
using an USB connection, plug the cable in the port labelled “USB” in the back of the dash logger.
