MoTeC M400-M600-M800
ECU Technical documentation
Release 1.02
8
www.aim-sportline.com
Here below is the draw showing MoTeC M400-M600-M800 pinout.
With reference to the draw here below, to connect Motec M400-M600-M800 ECU directly
to AIM logger:
•
connect AIM cable labelled CAN+ to pin 23 of 26 pins “B” male connector;
•
connect AIM cable labelled CAN- to pin 24 of 26 pins “B” male connector;
•
connect AIM cable labelled GND to pin 14 of 26 pins “B” male connector.
8
3.2 – Connecting MoTeC ECU using a Deltron connector
It is possible to connect MoTeC M400-M600-M800 ECU to AIM loggers using a DB9
connector and a Deltron connector whose part number, following MoTeC documentation,
is 716-0-0501. To connect the devices:
•
connect AIM cable labelled CAN+ to pin 5 of Deltron Connector connected to pin 23
of 26 pins “B” male connector;
•
connect AIM cable labelled CAN- to pin 4 of Deltron Connector connected to pin 24
of 26 pins “B” male connector;
•
connect AIM cable labelled GND to pin 1 of Deltron Connector connected to pin 5 of
DB9 connector connected to pin 14 of 26 pins “B” male connector.
Warning: in case this second connection does not work, please address to MoTeC
or to one of its dealers for further information.