EVO3 Pro/Pista
User Manual
Release 1.04
www.aim-sportline.com
12
2
Chapter 3 – How to install and power EVO3 Pro/Pista
To install EVO3 Pro/Pista on the vehicle:
•
choose a position where the logger is not in contact with oil or fuel;
•
ensure that the system is not installed too near to heat sources;
•
install system and wirings far from sources of electromagnetic interference like
spark plugs or coil.
EVO3 Pro/Pista
has one internal bi-axial accelerometer: to correctly sample
in-line
(parallel to the vehicle speed) and
lateral
(perpendicular to the vehicle speed) acceleration
install the logger as shown in example 1 of the below image. To install the logger
differently change Acc_1 and Acc_2 settings as explained in examples 2 and 3.
In case of bike application it is possible to install an external gyroscope, optional to
EVO3
Pro/Pista
, to create track maps. This sensor can be installed only on these channels that
supply the 12V power force it needs; to say:
•
on channels CH_8, CH_9, CH_10 e CH_11 of
EVO3 Pro
;
•
on channels CH_4, CH_5, CH_6, CH_7 e CH_8 of
EVO3 Pista
.