ECU Bridge
User Manual
Release 1.08
www.aim-sportline.com
1 4
2.2.2 – Connection of CAN/K Line ECU Bridge to the OBDII plug
With CAN/K Line
ECU Bridge
it is possible to receive data out coming from the ECU using
the vehicle CAN or K line. It is just sufficient to plug
ECU Bridge
OBDII connector in the
vehicle diagnostic (OBDII) plug and power
ECU Bridge
using the vehicle lighter plug.
Powering the vehicle on,
SmartyCam
and
ECU Bridge
will automatically power on.
Images here below show the place where OBDII plus is generally placed on the vehicles
(top image), a OBDII plug (bottom left) and an example of connection.
It is possible that all parameters managed by the ECU are sent on the OBDII plug. Refer to
paragraph 3.1 for further information concerning the channels that can be shown on
SmartyCam
videos.
9
