2
APE1553-1/2(-DS) Hardware Manual
1.2 How This Manual is organized
This Hardware Manual is comprised of following sections.
Section 1
- Introduction –
Contains an overview of this manual.
Section 2
- Installation –
Describes the steps required to install the module, and connect the device to
other external interfaces including the MIL-STD-1553 Bus, IRIG-B, and triggers.
Section 3
- Structure of the APE1553-1/-2 –
Describes the physical hardware interfaces on the module using a block diagram
and a description of each main component
Section 4
- Technical Data –
Describes the technical specification of the module.
Section 5
- Notes -
Acronyms etc.
1.3 Applicable Documents
The following documents shall be considered to be a part of this document to the extent
that they are referenced herein. In the event of conflict between the documents
referenced and the contents of this document, the contents of this document shall have
precedence.
1.3.1 Industry Documents
•
MIL-STD-1553B, Department of Defence Interface Standard for Digital
Time Division Command/Response Multiplex Data Bus, Notice 1-4,
January 1996
•
PCI Express BUS Specification; PCI-SIG, Revision 1.1
1.3.2 Product Specific AIM Documents
AIM - APE1553 Getting Started Manual
Assists the first time user with software installation, hardware setup and
starting a sample project.
AIM - Reference Manual APE1553 Application Interface Library
Provides a detailed description of the programming interface.
AIM – APE1553 Programmer's Guide
Provides the 1553 application developer with high-level s/w development
information including high level system design information, board support
package (BSP) contents, user application system design concepts,
function call guidelines and sample programs.
