5 - Getting Started
10
QPX750 Instruction Manual
5
GETTING STARTED
5.1
Using this manual
This section is a general introduction to the operation of the instrument and is intended to be read
before using the Power Supply for the first time.
In this manual front panel keys and sockets are shown in capitals, e.g.
ON, OFF. Text, entry fields and
messages displayed on the LCD are shown in a different font, e.g.
V Set, I Set.
The descriptions in this manual relate to using the instrument via the touch screen, alternatively, the
hard keys and rotary knob can be used. See ‘Navigation Controls’ for details on how to use the
instrument in this way.
Throughout this manual, the navigation through menus will be shown at the top of a section using the
following format:
Menu>Sub Menu>Option
NOTE
The pop-up screens for parameters will only occur when using the touch screen.
Trip/System Failure, Error, and Warning pop-up screens will appear when using any form
of navigation.
5.2
Switching on
Connect the instrument to the AC supply using the mains lead provided.
Press the POWER switch. At power up, the instrument displays a start-up message whilst initialising
the application.
Loading takes a few seconds, after which the home screen is displayed.
WARNING
To fully disconnect from the AC supply, unplug the mains cord from the back of the
instrument or switch off at the AC supply outlet; make sure that the means of
disconnection are readily accessible. Disconnect from the AC supply when not in use.
