aiko NP-42H5, Service Manual

Page: 79 / 94

< RGB Mode Table >
8) HDMI Input
(1)
Connect the Output terminal of the HDMI AV signal generator to the HDMI Input
using the HDMI cable
(2)
Connect the Output terminal of the HDMI Analog audio signal generator to
the HDMIRGB Audio Input using the RCA Stereo audio cable.
(3) Turn on the power by pressing the front key or the POWER key on the remote control.
(4) Select the
“HDMI” port using front panel button or Remote Controller.
.
(5)
Switch to HDMI mode and check if the HDMI video signals are properly displayed on the screen.
(Check if there is any problem with the signals from the Component/HDMI Mode Table.)
(6
) Check if there is any problem with the audio output by pressing the CONTROL key or
the VOL key on the remote control.
.
Mode Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
SDTV 480p 720 x 480 31.470 59.940 27.000
SDTV 576p 720 x 576 31.250 50.000 27.000
44.964 59.94 74.176
HDTV 720p 1280 x 720
45.000 60.00 74.25
33.750 60.0 74.25
33.176 59.94 74.176
28.125 50.0 74.25
HDTV 1080i 1920 x 1080
31.25 49.96 74.25
Input Sources
TV
.
HDMI
PC