aiko NP-42H5, Service Manual

Page: 76 / 94

6) COMPONENT Input
(1)
Connect the Component Video Input terminal to the video signal generator’s output terminal
using the RCA cable
(2)
Connect the Audio Output terminal of the video signal generator to the
Component Audio Input using the RCA cable
(3)
Turn on the power by pressing the front key or the POWER key on the remote control.
(4) Select the
“Component” port using front panel button or Remote Controller.
.
Input Sources
TV
.
COMPONENT1 (2)
.
(5)
) Check if the video signals display properly on the screen for each mode.
(6) Check if there is any problem with the audio output by pressing the CONTROL key or the VOL key on
the remote control.
.
(Check if there is any problem with the signals from the Component/HDMI Mode Table.)