aiko NP-42H5, Service Manual

Page: 75 / 94

4) VIDEO Input
(1) Connect the video input signals to the VIDEO Input terminals using the RCA cable.
(2) Turn on the power by pressing the front key or the POWER key on the remote control.
(3) Select “Video” port using front panel button or Remote Controller.
Input Sources
TV
.
AV1 (AV2)
(4) Check if the video signals display properly on the screen for each mode.
(5) Check if there is any problem with the audio output by pressing the CONTROL key or the VOL key on
the remote control.
* The video signals should be tested for both NTSC and PAL systems respectively, as they have
different signaling routes according to the broadcasting system.
.
5) S-VIDEO Input
(1)
Connect the video input signals to the S-VIDEO Input terminals using the S-Video cable.
.
(2)
Connect the Audio Input terminal (Video1’s Audio Port) to the Audio Output terminal
of the video signal generator using the RCA audio cable
(3)
Turn on the power by pressing the front key or the POWER key on the remote control.
(4) Select the
“S-Video” port using front panel button or Remote Controller.
.
Input Sources
TV
S-VIDEO
.
.
(5)
) Check if the video signals display properly on the screen for each mode.
(6) Check if there is any problem with the audio output by pressing the CONTROL key or the VOL key on
the remote control.