Notes
16. The sealer comes from the factory with two bolts protruding from the front of machine.
These bolts are for holding the shelf provided in the box. Remove bolts and do not use the
shelf unless the shelf is used as part of a separate stand.
17. A 2-quart pitcher, with the top rim cut off at the 2 qt. line, is a good measure to use in filling
pouches. Fill with 2 level measures. For ease of filling, pull empty pouch over top of first
filled pitcher, then upend pitcher. Pour in second pitcher.
3.
If Teflon cover on lower jaw is burned: unplug sealer, loosen and lift up cover, carefully
clean off any burrs that may be on heat strip, advance cover
2
inch, trim excess, and
retighten.
4.
If sealer fails to operate, check the two fuses mounted in lower back of case. Replace with
correct fuse size.
03-25-02
