aidapt VR110T Fixing And Maintenance Instructions Download Page 2

INTRODUCTION

Thank you for purchasing the Width Adjustable Bath Board from Aidapt. 

Please examine your product for any visible damage before using/installing. If you see any 

damage or suspect a fault, please do not use, but contact your supplier. 

For maximum strength and safety, this plastic bath board is made from a single piece 

mould and is supplied with a handle. The contoured design provides added comfort and 

the well-spaced drainage holes ensure the water drains away quickly and efficiently. The 

Easy Self-Locating Fixing System makes adjustment, positioning and removal simple and 

safe. 

If desired, you may purchase a green handle.  

FITTING YOUR BATH 

BOARD

Before attempting to fit your 

bath board please check 

that you have the following 

parts:

NB. If any parts are 

missing or damaged 

please contact your 

supplier. 

INTENDED USE

The Adjustable Bath Board is an aid to help accommodate users whilst bathing. 

N.B. This equipment must be installed by a competent person and a risk 

          assessment may be needed as to the suitability of the stool for the 

          particular user.

Weight Limit: 180 kg (28 st.)

NB. Do not exceed the weight limit stated – doing so could put the user at risk.

Summary of Contents for VR110T






Reviews: