Fixing and Maintenance Instructions
5
CASTORS:
The Walmesley range are fitted with 4 rubber pads to prevent floor damage and provide a solid
positioning, additionally, the chair comes with 2 locking castors for the rear of the chair if the user
wishes to fit these for extra stability.
ASSEMBLY:
Some models of chairs are packaged in two pieces consisting of the back and the base to make transport
and delivery easier. Assemble the chair as per the assembly instructions below.
DIRECTIONS:
1) Remove seat (fig. 1) and back (fig. 2) from packing bags.
2) Hold back the upholstery flap with both hands and line up brackets.(fig. 3)
3) Apply downward pressure (fig.4) and ensure both sides snap into locked position. (fig. 5)
Note:
Both back receivers need to be lowered onto the flat bars at the same time and evenly to prevent
binding.
Note:
Do not assemble the chair if the upholstery or any of the parts of the chairs are damaged.
Check all parts carefully before assembling the chair. If any problem is apparent contact the vendor.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
