Fixing and Maintenance Instructions
4
SAFETY INFORMATION (Continued)
• Do not jump or play on the chair, as this is not a toy.
• To prevent any unauthorised use, Aidapt Bathrooms Ltd recommends that the plug is removed from
the socket when the product is not in use.
• Do not disconnect the plug from the electrical outlet roughly or unplug by pulling the cord.
• Do not connect or disconnect the plug from the electrical outlet with wet hands. It may result in electrical
shock or mechanical breakdown.
• Do not place the AC/DC adaptor cord under the chair as it may cause damage to the cord and result
in electrical shock.
• Do not let the AC/DC adaptor cord hang down from the chair.
• Do not use the chair if the AC/DC cord or plug is damaged, or if the electrical outlet is excessively
loose. Contact a professional for inspection.
• If necessary, the power cable may be replaced with an identical one, but it must only be replaced by
a qualified technician.
• Do not touch the surface of the plug immediately after use, as it can be hot.
• Do not operate the remote control with wet hands, sharp or heavy objects.
• Avoid dropping the remote control.
• Do not step or place heavy objects on the remote control wire.
• Do not put your fingers and hands in between the seat and the footrest when the chair is
reclining or when the chair is returning back from the recline position to sitting position. You
may hurt your fingers/hands badly.
• This chair must be used in accordance with the instructions provided.
• The chair is not for professional use.
• The manufacturers of this chair, their agents and distributors are not liable for any damages to person(s)
or property(s) resulting from improper use of the chair.
• Use caution when using the lift feature if the chair back is reclined. The back should be in the upright
position when entering and leaving the chair unless a side transfer is being done using a vertical lift.
• Ensure the chair castors are braked when transferring.
CAUTION:
A sudden change in temperature from cold to warm can cause condensation on electrical
and mechanical parts. It is recommended that the chair be allowed to warm up for a minimum of an hour
before using to ensure proper operation and reduce the chances of mechanical breakdown.
Do not use the lift chair if any of the following events occur:
• Water is accidentally spilled on the chair. This may result in electric shock.
• The upholstery is torn and the inside mechanism is exposed.
• You detect any malfunction or another abnormal condition during operation.
Use Caution if there is a power failure. Injury may occur when power is restored unexpectantly if the
operation buttons are depressed. Avoid using the chair during severe lightning storms.
Please switch the power OFF immediately and disconnect the AC power cord from the electrical outlet
in the event of accidental damage or malfunction. Contact a professional for servicing.
SPECIFICATIONS:
WEIGHT
- the net weight of the chair is 56.5kgs (124.3lbs)
- the maximum weight capacity of the chair is 160kgs (352lbs)
Power Requirements – 100~240 V 50Hz 70W
Note motor operation: 2 minutes is available for continual use, allow 15 to 30 seconds between cycling
the motor.
