aidapt Solo VY300 Fixing And Maintenance Instructions Download Page 4

Fixing and Maintenance Instructions 

Ver.6 10/2013 (1570) 

CLEANING 

A useful guide to decontamination is MHRA leaflet DB2003(06). 

Do not use abrasive cleaners as this could damage the surface of the equipment. For 
cleaning, wipe with a clean cloth soaked in detergent solution and wring out. Depending on 
the detergent manufacturer’s instructions the solution may be heated. 

Wipe all surfaces of the equipment and the cloth should be re-immersed periodically and the 
detergent changed frequently. The detergent should be rinsed or wiped off using a clean 
cloth immersed in clean water and wrung out.   

To disinfect make sure the equipment has been cleaned and dried and then wipe over with a 
clean cloth and a compatible liquid disinfectant. After disinfecting clean with clean water 
and dry.  

When using detergent or disinfectants then please refer to manufacturers’ instructions and if 
unsure then consult your local Infection Control Specialist for advice. 

This equipment can be cleaned/disinfected by moist heat at 80

o

C for a minimum of 1 minute 

or autoclaved at 80

o

C for at least 1 minute. After cleaning or disinfecting treat all joints with a 

water dispersing agent, e.g. WD40. 

REISSUE 

If you reissue or are about to reissue this product, please thoroughly check all components 
for their safety.  

If in any doubt, please do not issue or use, but immediately contact your supplier for 
service support. 

CARE & MAINTENANCE

 

Please make a safety check of the product at regular intervals or if you have any concerns. 

IMPORTANT INFORMATION 

The information given in this instruction booklet must not be taken as forming part of or 
establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt 
(Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the 
information is given. 

Please exercise common sense and do not take any unnecessary risks when using this 
product; as the user you must accept liability for safety when using the product. 

Please do not hesitate to contact the person who issued this product to you or the 
manufacturer (detailed below) if you have any queries concerning the assembly/use of your 
product.

  

Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9

 3EX 

Telephone: +44 (0) 1744 745 020 

 Fax: +44 (0) 1744 745 001 

 Web: www.aidapt.co.uk 

Email: [email protected] 

 [email protected] 

 [email protected]  

Summary of Contents for Solo VY300













Reviews: