Fixing and Maintenance Instructions
Ver.6 10/2013 (1570)
2
INTRODUCTION
Thank you for deciding to purchase from the Aidapt Solo Hinged Arm Supports range. This
range is manufactured from the finest materials and components available When installed
and used correctly they are designed to give many years of reliable trouble-free service.
Please examine your product for any visible damage before using. If you see any damage or
suspect a fault, please contact your supplier.
NB. This equipment must be installed by a competent person.
Product
Weight Limit
VY300/1/2 Solo hinged arm support
127 kg (20 st)
VY309 Solo Single hinged arm support
127 kg (20 st)
VY307 Solo floor console
254 kg (40 st)
VY304/5/6 Solo hinged arm support with leg
190 kg (30 st)
VY308 Solo Compact hinged arm support
190 kg (30 st)
VY423 Solo Contract hinged arm support with leg
127 kg (20 st)
VY424 Solo Contract hinged arm support
115 kg (18 st)
Do not exceed the weight limit stated – doing so could put the user at risk.
N.B. The weight limits quoted are based on the product performance with secure
fixings.
BEFORE USE
•
Carefully remove all packaging. Avoid using any knives or other sharp instruments
as this may damage the surface of the product.
•
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product as it may compromise your safety, but contact your
supplier for support.
FIXING OF WALL PLATE AND/ OR FLOOR PLATE
Firstly check the substrate where you intend to fix your hinged arm support, ensuring that it
is sound. Also check the type of substrate you intend to fix to e.g. brick/ block timber or
concrete. Always check the type of fixing you are going to use on this substrate for their
compatibility.
To fit the hinged arm support, choose the area where you intend to fix the product, offer up
and mark the wall through the fixing holes, ensuring that you keep the arm level and square.
RECOMMENDED FIXINGS
As substrate can vary considerably, we do not recommend particular fixings, but we suggest
that chemical fixings should be your first option for solid brick/ block and coach bolts onto
timber frames constructed from a minimum of 75 mm x 75 mm soft wood.
We cannot however accept liability for your choice of fixing and recommend that all hinged
arm support products are installed by an experienced and competent fitter.
