10
11
Operation Mode Selection
The control unit has three modes of operation.
Active/Dynamic Mode
is operational by default
and provides an alternating surface for patient
therapy.
Care Mode
provides maximum pressure and
stability. It is designed primarily for patient transfer and handling.
Transport Mode
is designed for patient comfort and support as well as in
preperation for bed transport without power. This mode inflates all cells to the
automatic or selected pressure and will revert back to Active Mode after 1 hour
PRESSURE
POWER
TRANSPORT
LOCK/UNLOCK
THERAPY
PATIENT
TRANSFER
Control Unit Functions
Alarms and diagnostics:
The control unit features an audio visual
alarm diagnostic which will activate if there
is a malfunction.
If the left button flashes and alarms, it
indicates that there is a problem with the mattress or an air leak to the
control unit. If the right button flashes and alarms, it indicates that there
is an electrical malfunction or problem within the control unit itself.
Both these audio alarms can be muted by pressing the indicator which is
flashing. This will mute the alarm for 20 minutes. If the malfunction has
not been resolved however, the alarm will re-activate.
For more information on alarms and faults with the system, please see the
Troubleshooting section of this manual.
PRESSURE
POWER
TRANSPORT
LOCK/UNLOCK
THERAPY
PATIENT
TRANSFER
Control Unit Functions
10
11
Operation Mode Selection
The control unit has three modes of operation.
Active/Dynamic Mode
is operational by default
and provides an alternating surface for patient
therapy.
Care Mode
provides maximum pressure and
stability. It is designed primarily for patient transfer and handling.
Transport Mode
is designed for patient comfort and support as well as in
preperation for bed transport without power. This mode inflates all cells to the
automatic or selected pressure and will revert back to Active Mode after 1 hour
PRESSURE
POWER
TRANSPORT
LOCK/UNLOCK
THERAPY
PATIENT
TRANSFER
Control Unit Functions
Alarms and diagnostics:
The control unit features an audio visual
alarm diagnostic which will activate if there
is a malfunction.
If the left button flashes and alarms, it
indicates that there is a problem with the mattress or an air leak to the
control unit. If the right button flashes and alarms, it indicates that there
is an electrical malfunction or problem within the control unit itself.
Both these audio alarms can be muted by pressing the indicator which is
flashing. This will mute the alarm for 20 minutes. If the malfunction has
not been resolved however, the alarm will re-activate.
For more information on alarms and faults with the system, please see the
Troubleshooting section of this manual.
PRESSURE
POWER
TRANSPORT
LOCK/UNLOCK
THERAPY
PATIENT
TRANSFER
Control Unit Functions
