14
15
aidacare.com.au
5. SPECIFICATIONS
SIZE
SINGLE
KING SINGLE
BASIC DIMENSIONS
Overall Length
2100–2300 mm
Overall Width
920 mm
1070 mm
Overall Width (rails fitted)
1030 mm
1200 mm
Mattress Surface Length
(between panels)
2000–2200 mm
Bed Platform Height
Range
300–750 mm
Back Rest Angle
Adjustment
0° to 70°
Knee Bend Angle
Adjustment
0° to 40°
MATTRESS SIZE
Recommended
Mattress Size
Maximum Mattress Depth
Width = 900 mm
Width = 1050 mm
Length = 2000 mm
Depth = 150 mm
BED WEIGHT & SAFE WORKING LOAD
Without Side Rails
112 kg
116 kg
SWL
220 kg
ELECTRIC PARAMETER
Power Input
100–240V AC 50Hz, Max current 1A
Rate Load
Interruption 10%, Max 2 minutes / 18 minutes
Leakage Protection
Class 1 Type B
Waterproof Grade
IP54
STANDARD
Aidacare AC4 beds are designed and manufactured in compliance
with International Standard IEC 60601-2-52.
WARNING
Before cleaning always disconnect the bed from the mains power source.
Note: It is strongly recommended that protective clothing be used
when cleaning.
Note: The following procedure also applies to the beds accessories,
but does not include mattresses.
• Wipe the beds surfaces with a soft cloth moistened with hot water
and mild detergent (or the facilities recommended cleaning solution).
It is recommended that the cloth be a white material to prevent
bleeding of die colours to the bed. Take extra care in areas that can
harbour dirt or dust.
• Rinse with clean water and a dry clean cloth.
• To remove potentially infectious materials such as body fluids, or when
the bed has been used by someone with a known infection. Clean with
NaDCC (e.g. Presept, Actichlor) at 10,000 ppm of available chlorine.
Rinse and dry.
• Allow the cleaned parts to dry before replacing the mattress.
CAUTION
Do not use abrasive Hypocarbonate or Phenolic compounds or pads.
7. MAINTENANCE
To prolong the working life of the bed and for trouble free operation it is
recommended that routine inspections should be performed by a person
who is suitably qualified and well acquainted with the design, use and care
of AC4 beds.
If inspection reveals that the safety of the bed is jeopardised in any way,
it should be IMMEDIATELY WITHDRAWN FROM SERVICE, tagged as such
and the owner notified.
6. CLEANING
