DAC3115
15
•
Daily lubrication is not needed if you use an oil distributor.
Connecting the pneumatic system
An example of connecting a pneumatic system:
1.
Pneumatic compressor
2.
Filter / water extractor
3.
Pressure regulator
4.
Oil distributor
5.
Pneumatic hose
6.
Tool
Use an oil distributor in the pneumatic system in order to ensure the effectiveness and
long life span of the pneumatic appliance.
Only use oil that is suitable for pneumatic
appliances and check the oil quantity in the oil distributor daily. NOTE: When the
pneumatic network’s length exceeds 10 m the output of the oil distributor is not
necessary enough to lubricate the pneumatic appliances effectively enough. In this case,
ensure sufficient lubrication according to the point “lubrication”.
The pneumatic filter/water extractor must be used to remove liquid and dirt, to prevent
rust, damages and wear of the machine inner parts. The filter must be checked daily
and emptied when needed.
The machine, connectors and hoses must be protected against dirt. Coarse dust, sand
etc. can cause leaks and damage the machine and its connectors.
7. SPECIFICATIONS
No load speed
approx. 160 v/min
Air usage
approx. 114 l/min
Spindle
½ “
Air supply connection
¼ “
Max torque
81 Nm
Max air pressure
6,3 bar (630 kPa)
Noise values (prEN ISO 15744):
Noise pressure level (LpA)
96,5 dB(A)
Noise power level (LwA)
107,5 dB(A)
Vibration (EN 28662)
13,7 m/s²
