AIC SILOX S Installation And Maintenance Manual Download Page 5

5

I10_092-01 • SILOX S_EN

G

eneral

 I

nformatIon

 

 

î

This appliance must be installed ac-

cording to the applicable local regu-

lations  and  standards  by  a  qualifi ed 

professional.

 

î

Electrical connections must be car-

ried out according to applicable local   

regulations and standards by a quali-

fi ed professional.

 

î

This appliance can be used by chil-

dren who are at least 8 years old and 

by persons with reduced physical, 

sensory or mental capabilities or lack 

of experience and knowledge, provid-

ed that they are under supervision or 

have been given instructions concern-

ing the use of the appliance in a safe 

way and that they understand the haz-

ards involved. 

 

î

Cleaning and user maintenance shall 

not be performed by children without 

supervision. Children shall not play 

with the appliance.

 

î

Any modifi cation to the appliance and 

its components is strictly forbidden 

without the prior written consent of the 

manufacturer.

 

î

If components need to be replaced, 

only genuine factory parts or compo-

nents approved by the manufacturer 

must be used.

When working on the appliance 

and the system, make sure to 

use the appropriate tools to 

avoid damaging the pipes and 

components.

 

î

When unpacking the appli-

ance, check the integrity and 

condition of the packaging 

and that all the components 

and accessories described 

in the packing list are pres-

ent. Contact your supplier in 

case of problem.

 

î

When discarding the packaging, do not 

contaminate the environment. Dispose of 

it according to the applicable local regu-

lations on recycling.

i

 

î

When the appliance is con-

nected to the electrical net-

work, it must be earthed. 

 

î

Make sure that a fuse or circuit breaker 

of the recommended rating is installed 

outside the appliance, so as to be able 

to shut the power down.

 

î

Before performing any operation on 

the electrical circuit, isolate the electri-

cal supply of the appliance through the 

external power-cutting device (fuse, 

circuit-breaker, etc.).

General Safety Instructions

Summary of Contents for SILOX S





















Reviews: