AIC SILOX S Installation And Maintenance Manual Download Page 2

2

I10_092-01 • SILOX S_EN

The quality of our products is essential to us, 

and we aim therefore at improving them contin-

ually. To this end, we reserve the right to change 

the technical characteristics and features of our 

products without prior notice. Please check for 

the latest revision of the manual on our website 

(www.myaic.eu).
The manufacturer shall not be held liable for any 

malfunction of the product resulting from:

 

î

The failure to comply with the safety and 

installation instructions provided herein,

 

î

The failure to comply with the safety and 

operation instructions and recommenda-

tions provided herein,

 

î

The failure to have the appliance main-

tained regularly,

 

î

A modification of the appliance that is not 

approved by the manufacturer,

 

î

The use the product for any other purpose 

than its intended use,

 

î

The use of components and accessories 

that are not approved by the manufacturer.

 

Installer’s Responsibility

The installer is responsible for the correct instal-

lation and commissioning of the appliance ac-

cording to:

 

î

The instructions and recommendations 

provided herein,

 

î

The applicable regulations and standards.

The installer shall provide the end-user with:

 

î

Any relevant explanation about the operation 

of the appliance and the hydraulic system as 

well as the safety devices that are provided,

 

î

Any instruction regarding periodic checks 

to be performed and possible anomaly to 

be reported,

 

î

All the documentation delivered with the 

appliance and installed accessories.

The installer shall also inform the end-user of the 

necessity to have the appliance checked and 

maintained regularly by a qualified professional.

End-user’s Responsibility

To ensure the best performances and safety of 

the appliance, the end-user shall:

 

î

Make sure that the appliance is installed, and 

commissioned by a qualified professional,

 

î

Make sure that the appliance is checked 

and  maintained  regularly  by  a  qualified 

professional,

 

î

Comply with all the instructions and recom-

mendations provided in the appliance docu-

mentation,

 

î

Make sure to receive from the installer all 

the necessary explanations related to the 

operation of the appliance and the safety 

devices,

 

î

Make sure to receive from the installer all the 

appliance and accessories documentation,

 

î

Keep all the appliance documentation in a 

safe place for future use.

The end-user shall use the product for its intend-

ed use.

 

î

Should the installer or the end user not comply with the instructions and require-

ments stated in this manual, the warranty will be void. 

 

î

For more information on the warranty terms and conditions, please connect to 

our website: www.myaic.eu.

i

Summary of Contents for SILOX S





















Reviews: